Arbo was
established in 1974 in Lugano, Switzerland with the
introduction of the Arbo patented closed loop,
resonant frequency vibratory feeder, the first
device of its kind on the market. Due to the
linearity and high turn down ratio of this type of
vibratory feeder (up to 1,000:1 ratio), it is
extremely accurate, even in volumetric mode.
For more than 30
years ARBO has been serving the manufacturing
industry and supplying high quality volumetric and
gravimetric feed systems. ARBO works closely with
its customers in supplying solutions that fit their
needs.
ARBO's
volumetric feeder line includes:
KDA-VV/80
volumetric vibratory tray feeder is based on its
vibratory drive Type AF14 with tachometer feedback
for operation at
resonant frequency of the tray and the material on
the tray.
Several tray model are available and are selected
according to the
material and feed rate requirements.
Works great
at discharge of bulk bag unloader.
Click for
brochure
KDA-VS/28
twin screw feeder is ideal for low to moderate
feed
rates with a wide variety of materials. With a
snap-off hopper to
facilitate cleaning the VS/28 is easily converted to
a single screw
feeder. The internally driven horizontal hopper
agitator makes the
VS/28 suitable for more difficult materials which
have a tendency to
bridge or rathole. Special screw designs are
available for materials
from free flowing to sticky and cohesive.
The nominal capacity of the VS/28 is from around one
half to several
hundred pounds per hour depending on material
density, flow
characteristics and screw selection.
Click for Brochure
Flex-Feeder features
Molded hopper
mounted in a rigid steel frame with massager
paddles. All tool free quick take apart. The
flexible hopper
can be removed vertically,
from the top or,
if top access is
restricted, it can be
removed horizontally
from the front of the
unit.
Click for Brochure
