Conventional pulse jet filter receiver represents our full scale line of filter receivers. Conventional size but not conventional in construction.


Click on images to enlarge

Click for Brochure

Combining 1/4" to 3/8" thick laser cut housing flanges with a 7 ga tube sheet, and heavy wall (up to 7 ga) shell provide external rib free construction for a smooth clean look. Air header assembly is mated to housing blow tubes with galvanized guardian couplings-no more hose sleeve blow outs! Side access door that is field re-configurable to right-hand or left-hand opening. Bolt on hopper can be fitted with radial or tangential inlet. Metal smooth bag cups and cast aluminum venturis provide a resistance to rough crews when re-bagging filter. Quality is found everywhere you look. Many options and combinations from a large field of modules.

Standard Features

Standard 10 ga. housings.
Domed clean air plenum.
All flanges welded 1/4" thick laser cut plate.
4" compressed air header.
Cast aluminum diaphragm valves with guardian couplings.
NEMA 4 enclosed 10 position sequential timer.
Enclosed 120/60/1 solenoid pilot valves.
10 ga. bolt in tube sheet.
Mild steel bolted or riveted bag cups with gaskets.
Cast aluminum venturis.
Mild steel or stainless steel bag cages-bottom remove.
Stainless steel quick release filter clamps.
Quick access vault like dusty air plenum door-opens left or right hand.

Options

Clean air plenum access port.
Bolt on fan platform.
High inlet with doghouse and baffle set.
Second access door into dusty air plenum.
Continuous welded inside and outside.
Sweep arm discharge.
Stainless steel construction.
High vacuum to 15" hg.